It’s a lightweight solution to a cluttered handlebar for when you need one more strapping point for your gear up front. Strap on your dry bag or sleep system and shred! The Cradle is really cool.
The adjustable tilt allows you to fine tune your fit for your desired bags and your specific handlebar setup. Height adjustment affords weaving the cradle into a prime location even with a short stem, minimal spacer stack, a shorty head tube, and a suspension fork.
Keep those cables uncrushed, bag up, and gear rigid on all of your favorite terrain.
Stem: Replaces 20mm of headset Spacers – 1 1/8″ bore – approximately 80mm from center of steerer to front of Cradle
Platform: 4.5″x9.75″ (115mm x 245mm)
265g with all included hardware
Not Intended for use with carbon forks or carbon seat posts
To install the Cradle you will need at least a 4mm allen key, 5mm allen key, and an 8mm open end wrench. The Forager Cycles Link Wrench is the perfect companion to the Cradle
The Cradle is a one size fits most front rack. You will need at least 20mm of steerer tube spacers that the Cradle “Stem” will replace. The Cradle Stem drops ~17mm over its length to get out of the way of short handlebar stems, but if your specific handlebar stem is particularly beefy, you may need an additional 5mm spacer between handlebar stem+Cradle Stem.
Pre Orders will ship before December